aboutsummaryrefslogtreecommitdiff
path: root/Makefile (unfollow)
Commit message (Collapse)AuthorFilesLines
2024-09-15Linux 6.11v6.11bits/160-fpwmbits/100-bluetoothbaseLinus Torvalds1-1/+1
2024-09-15Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"Paolo Bonzini2-11/+7
This reverts commit 377b2f359d1f71c75f8cc352b5c81f2210312d83. This caused a regression with the bochsdrm driver, which used ioremap() instead of ioremap_wc() to map the video RAM. After the commit, the WB memory type is used without the IGNORE_PAT, resulting in the slower UC memory type. In fact, UC is slow enough to basically cause guests to not boot... but only on new processors such as Sapphire Rapids and Cascade Lake. Coffee Lake for example works properly, though that might also be an effect of being on a larger, more NUMA system. The driver has been fixed but that does not help older guests. Until we figure out whether Cascade Lake and newer processors are working as intended, revert the commit. Long term we might add a quirk, but the details depend on whether the processors are working as intended: for example if they are, the quirk might reference bochs-compatible devices, e.g. in the name and documentation, so that userspace can disable the quirk by default and only leave it enabled if such a device is being exposed to the guest. If instead this is actually a bug in CLX+, then the actions we need to take are different and depend on the actual cause of the bug. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-09-13pinctrl: pinctrl-cy8c95x0: Fix regcachePatrick Rudolph1-5/+9
The size of the mux stride was off by one, which could result in invalid pin configuration on the device side or invalid state readings on the software side. While on it also update the code and: - Increase the mux stride size to 16 - Align the virtual muxed regmap range to 16 - Start the regmap window at the selector - Mark reserved registers as not-readable Fixes: 8670de9fae49 ("pinctrl: cy8c95x0: Use regmap ranges") Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reported-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/20240902072859.583490-1-patrick.rudolph@9elements.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-09-12cifs: Fix signature miscalculationDavid Howells1-1/+1
Fix the calculation of packet signatures by adding the offset into a page in the read or write data payload when hashing the pages from it. Fixes: 39bc58203f04 ("cifs: Add a function to Hash the contents of an iterator") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-09-12mm: avoid leaving partial pfn mappings around in error caseLinus Torvalds1-5/+22
As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. Reported-and-tested-by: Jann Horn <jannh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Simona Vetter <simona.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-12drm/xe/client: add missing bo locking in show_meminfo()Matthew Auld1-3/+36
bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-6-matthew.auld@intel.com (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe/client: fix deadlock in show_meminfo()Matthew Auld1-1/+5
There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-5-matthew.auld@intel.com (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe/oa: Enable Xe2+ PES disaggregationAshutosh Dixit2-0/+5
Enable Xe2+ PES disaggregation (for OAG) to retrieve disaggregated metrics when disaggregated data is needed. Userspace can select whether to receive aggregated or disaggregated metrics via the particular OA configuration it uses (programmed via DRM_XE_OBSERVATION_OP_ADD_CONFIG). Bspec: 61101 Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240909165933.2638765-1-ashutosh.dixit@intel.com Cc: stable@vger.kernel.org (cherry picked from commit fb2551a0e93897aec7fb3d4f473ebc06b146d160) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe/display: fix compat IS_DISPLAY_STEP() range endJani Nikula1-1/+1
It's supposed to be an open range at the end like in i915. Fingers crossed that nobody relies on this definition. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 453afb1a439994deeacb8d9ecbb48c1f2348ea0a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe: Fix access_ok check in user_fence_createNirmoy Das1-1/+1
Check size of the data not size of the pointer. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407300421.IBkAja96-lkp@intel.com/ Fixes: ddeb7989a98f ("drm/xe: Validate user fence during creation") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Apoorva Singh <apoorva.singh@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240806110722.28661-1-nirmoy.das@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit e102b5ed6e283a144793cab8fcd95f61d0ddbadb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe: Fix possible UAF in guc_exec_queue_process_msgMatthew Brost1-1/+3
Store xe_device ahead of processing message as message can be free'd in some cases. v2: - Including missing local changes v3: - Resend for CI Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202407231445.rpisd1vA-lkp@intel.com/ Fixes: 55ea73aacfb9 ("drm/xe: Build PM into GuC CT layer") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240724164341.1848954-1-matthew.brost@intel.com (cherry picked from commit 1a394b4f504f33eac8c38b6f42ba025105c7e869) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe: Remove fence check from send_tlb_invalidationMatthew Brost1-2/+2
'fence' argument in send_tlb_invalidation cannot be NULL, remove non-NULL check from send_tlb_invalidation. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202407231049.esig0Fkb-lkp@intel.com/ Fixes: 58bfe6674467 ("drm/xe: Drop xe_gt_tlb_invalidation_wait") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240723190714.1744653-1-matthew.brost@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit 6482253e6e1ad1c3a76645a3899d3cfdb5b918cb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12drm/xe/gt: Remove double includeLucas De Marchi1-1/+0
The header generated/xe_wa_oob.h is included twice. Remove one. Fixes: 27cb2b7fec2a ("drm/xe/bmg: implement Wa_16023588340") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202407052122.AzuWSPuo-lkp@intel.com/ Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708173301.1543871-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 3d122660dc70029d9cccb4e8670125f0affa959e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-12net: netfilter: move nf flowtable bpf initialization in ↵Lorenzo Bianconi2-1/+7
nf_flow_table_module_init() Move nf flowtable bpf initialization in nf_flow_table module load routine since nf_flow_table_bpf is part of nf_flow_table module and not nf_flow_table_inet one. This patch allows to avoid the following kernel warning running the reproducer below: $modprobe nf_flow_table_inet $rmmod nf_flow_table_inet $modprobe nf_flow_table_inet modprobe: ERROR: could not insert 'nf_flow_table_inet': Invalid argument [ 184.081501] ------------[ cut here ]------------ [ 184.081527] WARNING: CPU: 0 PID: 1362 at kernel/bpf/btf.c:8206 btf_populate_kfunc_set+0x23c/0x330 [ 184.081550] CPU: 0 UID: 0 PID: 1362 Comm: modprobe Kdump: loaded Not tainted 6.11.0-0.rc5.22.el10.x86_64 #1 [ 184.081553] Hardware name: Red Hat OpenStack Compute, BIOS 1.14.0-1.module+el8.4.0+8855+a9e237a9 04/01/2014 [ 184.081554] RIP: 0010:btf_populate_kfunc_set+0x23c/0x330 [ 184.081558] RSP: 0018:ff22cfb38071fc90 EFLAGS: 00010202 [ 184.081559] RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 [ 184.081560] RDX: 000000000000006e RSI: ffffffff95c00000 RDI: ff13805543436350 [ 184.081561] RBP: ffffffffc0e22180 R08: ff13805543410808 R09: 000000000001ec00 [ 184.081562] R10: ff13805541c8113c R11: 0000000000000010 R12: ff13805541b83c00 [ 184.081563] R13: ff13805543410800 R14: 0000000000000001 R15: ffffffffc0e2259a [ 184.081564] FS: 00007fa436c46740(0000) GS:ff1380557ba00000(0000) knlGS:0000000000000000 [ 184.081569] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.081570] CR2: 000055e7b3187000 CR3: 0000000100c48003 CR4: 0000000000771ef0 [ 184.081571] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 184.081572] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 184.081572] PKRU: 55555554 [ 184.081574] Call Trace: [ 184.081575] <TASK> [ 184.081578] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081580] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081582] ? __register_btf_kfunc_id_set+0x199/0x200 [ 184.081585] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081586] ? __warn.cold+0x93/0xed [ 184.081590] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081592] ? report_bug+0xff/0x140 [ 184.081594] ? handle_bug+0x3a/0x70 [ 184.081596] ? exc_invalid_op+0x17/0x70 [ 184.081597] ? asm_exc_invalid_op+0x1a/0x20 [ 184.081601] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081602] __register_btf_kfunc_id_set+0x199/0x200 [ 184.081605] ? __pfx_nf_flow_inet_module_init+0x10/0x10 [nf_flow_table_inet] [ 184.081607] do_one_initcall+0x58/0x300 [ 184.081611] do_init_module+0x60/0x230 [ 184.081614] __do_sys_init_module+0x17a/0x1b0 [ 184.081617] do_syscall_64+0x7d/0x160 [ 184.081620] ? __count_memcg_events+0x58/0xf0 [ 184.081623] ? handle_mm_fault+0x234/0x350 [ 184.081626] ? do_user_addr_fault+0x347/0x640 [ 184.081630] ? clear_bhb_loop+0x25/0x80 [ 184.081633] ? clear_bhb_loop+0x25/0x80 [ 184.081634] ? clear_bhb_loop+0x25/0x80 [ 184.081637] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 184.081639] RIP: 0033:0x7fa43652e4ce [ 184.081647] RSP: 002b:00007ffe8213be18 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 184.081649] RAX: ffffffffffffffda RBX: 000055e7b3176c20 RCX: 00007fa43652e4ce [ 184.081650] RDX: 000055e7737fde79 RSI: 0000000000003990 RDI: 000055e7b3185380 [ 184.081651] RBP: 000055e7737fde79 R08: 0000000000000007 R09: 000055e7b3179bd0 [ 184.081651] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000040000 [ 184.081652] R13: 000055e7b3176fa0 R14: 0000000000000000 R15: 000055e7b3179b80 Fixes: 391bb6594fd3 ("netfilter: Add bpf_xdp_flow_lookup kfunc") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240911-nf-flowtable-bpf-modprob-fix-v1-1-f9fc075aafc3@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-12PCI: Fix potential deadlock in pcim_intx()Philipp Stanner1-0/+2
25216afc9db5 ("PCI: Add managed pcim_intx()") moved the allocation step for pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As before, pcim_enable_device() sets pci_dev.is_managed to true; and it is never set to false again. Due to the lifecycle of a struct pci_dev, it can happen that a second driver obtains the same pci_dev after a first driver ran. If one driver uses pcim_enable_device() and the other doesn't, this causes the other driver to run into managed pcim_intx(), which will try to allocate when called for the first time. Allocations might sleep, so calling pci_intx() while holding spinlocks becomes then invalid, which causes lockdep warnings and could cause deadlocks: ======================================================== WARNING: possible irq lock inversion dependency detected 6.11.0-rc6+ #59 Tainted: G W -------------------------------------------------------- CPU 0/KVM/1537 just changed the state of lock: ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at: vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another, HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); local_irq_disable(); lock(&vdev->irqlock); lock(fs_reclaim); <Interrupt> lock(&vdev->irqlock); *** DEADLOCK *** Have pcim_enable_device()'s release function, pcim_disable_device(), set pci_dev.is_managed to false so that subsequent drivers using the same struct pci_dev do not implicitly run into managed code. Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com Fixes: 25216afc9db5 ("PCI: Add managed pcim_intx()") Reported-by: Alex Williamson <alex.williamson@redhat.com> Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/ Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-11workqueue: Clear worker->pool in the worker thread contextLai Jiangshan1-2/+6
Marc Hartmayer reported: [ 23.133876] Unable to handle kernel pointer dereference in virtual kernel address space [ 23.133950] Failing address: 0000000000000000 TEID: 0000000000000483 [ 23.133954] Fault in home space mode while using kernel ASCE. [ 23.133957] AS:000000001b8f0007 R3:0000000056cf4007 S:0000000056cf3800 P:000000000000003d [ 23.134207] Oops: 0004 ilc:2 [#1] SMP (snip) [ 23.134516] Call Trace: [ 23.134520] [<0000024e326caf28>] worker_thread+0x48/0x430 [ 23.134525] ([<0000024e326caf18>] worker_thread+0x38/0x430) [ 23.134528] [<0000024e326d3a3e>] kthread+0x11e/0x130 [ 23.134533] [<0000024e3264b0dc>] __ret_from_fork+0x3c/0x60 [ 23.134536] [<0000024e333fb37a>] ret_from_fork+0xa/0x38 [ 23.134552] Last Breaking-Event-Address: [ 23.134553] [<0000024e333f4c04>] mutex_unlock+0x24/0x30 [ 23.134562] Kernel panic - not syncing: Fatal exception: panic_on_oops With debuging and analysis, worker_thread() accesses to the nullified worker->pool when the newly created worker is destroyed before being waken-up, in which case worker_thread() can see the result detach_worker() reseting worker->pool to NULL at the begining. Move the code "worker->pool = NULL;" out from detach_worker() to fix the problem. worker->pool had been designed to be constant for regular workers and changeable for rescuer. To share attaching/detaching code for regular and rescuer workers and to avoid worker->pool being accessed inadvertently when the worker has been detached, worker->pool is reset to NULL when detached no matter the worker is rescuer or not. To maintain worker->pool being reset after detached, move the code "worker->pool = NULL;" in the worker thread context after detached. It is either be in the regular worker thread context after PF_WQ_WORKER is cleared or in rescuer worker thread context with wq_pool_attach_mutex held. So it is safe to do so. Cc: Marc Hartmayer <mhartmay@linux.ibm.com> Link: https://lore.kernel.org/lkml/87wmjj971b.fsf@linux.ibm.com/ Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Fixes: f4b7b53c94af ("workqueue: Detach workers directly in idle_cull_fn()") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-09-11net: tighten bad gso csum offset check in virtio_net_hdrWillem de Bruijn1-1/+2
The referenced commit drops bad input, but has false positives. Tighten the check to avoid these. The check detects illegal checksum offload requests, which produce csum_start/csum_off beyond end of packet after segmentation. But it is based on two incorrect assumptions: 1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO. True in callers that inject into the tx path, such as tap. But false in callers that inject into rx, like virtio-net. Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal. 2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL. False, as tcp[46]_gso_segment will fix up csum_start and offset for all other ip_summed by calling __tcp_v4_send_check. Because of 2, we can limit the scope of the fix to virtio_net_hdr that do try to set these fields, with a bogus value. Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/ Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11netlink: specs: mptcp: fix port endiannessAsbjørn Sloth Tønnesen1-1/+0
The MPTCP port attribute is in host endianness, but was documented as big-endian in the ynl specification. Below are two examples from net/mptcp/pm_netlink.c showing that the attribute is converted to/from host endianness for use with netlink. Import from netlink: addr->port = htons(nla_get_u16(tb[MPTCP_PM_ADDR_ATTR_PORT])) Export to netlink: nla_put_u16(skb, MPTCP_PM_ADDR_ATTR_PORT, ntohs(addr->port)) Where addr->port is defined as __be16. No functional change intended. Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240911091003.1112179-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: dpaa: Pad packets to ETH_ZLENSean Anderson1-1/+8
When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11mptcp: pm: Fix uaf in __timer_delete_syncEdward Adam Davis1-4/+9
There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: libwx: fix number of Rx and Tx descriptorsJiawen Wu1-3/+3
The number of transmit and receive descriptors must be a multiple of 128 due to the hardware limitation. If it is set to a multiple of 8 instead of a multiple 128, the queues will easily be hung. Cc: stable@vger.kernel.org Fixes: 883b5984a5d2 ("net: wangxun: add ethtool_ops for ring parameters") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910095629.570674-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: dsa: felix: ignore pending status of TAS module when it's disabledXiaoliang Yang1-4/+7
The TAS module could not be configured when it's running in pending status. We need disable the module and configure it again. However, the pending status is not cleared after the module disabled. TC taprio set will always return busy even it's disabled. For example, a user uses tc-taprio to configure Qbv and a future basetime. The TAS module will run in a pending status. There is no way to reconfigure Qbv, it always returns busy. Actually the TAS module can be reconfigured when it's disabled. So it doesn't need to check the pending status if the TAS module is disabled. After the patch, user can delete the tc taprio configuration to disable Qbv and reconfigure it again. Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()Jeongjun Park1-0/+4
In the function hsr_proxy_annouance() added in the previous commit 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data"), the return value of the hsr_port_get_hsr() function is not checked to be a NULL pointer, which causes a NULL pointer dereference. To solve this, we need to add code to check whether the return value of hsr_port_get_hsr() is NULL. Reported-by: syzbot+02a42d9b1bd395cbcab4@syzkaller.appspotmail.com Fixes: 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240907190341.162289-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: include net_helper.sh fileMatthieu Baerts (NGI0)1-1/+1
Similar to the previous commit, the net_helper.sh file from the parent directory is used by the MPTCP selftests and it needs to be present when running the tests. This file then needs to be listed in the Makefile to be included when exporting or installing the tests, e.g. with: make -C tools/testing/selftests \ TARGETS=net/mptcp \ install INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -c net/mptcp Fixes: 1af3bc912eac ("selftests: mptcp: lib: use wait_local_port_listen helper") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: include lib.sh fileMatthieu Baerts (NGI0)1-0/+2
The lib.sh file from the parent directory is used by the MPTCP selftests and it needs to be present when running the tests. This file then needs to be listed in the Makefile to be included when exporting or installing the tests, e.g. with: make -C tools/testing/selftests \ TARGETS=net/mptcp \ install INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -c net/mptcp Fixes: f265d3119a29 ("selftests: mptcp: lib: use setup/cleanup_ns helpers") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: join: restrict fullmesh endp on 1st sfMatthieu Baerts (NGI0)1-1/+3
A new endpoint using the IP of the initial subflow has been recently added to increase the code coverage. But it breaks the test when using old kernels not having commit 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk"), e.g. on v5.15. Similar to commit d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not"), it is possible to add the new endpoint conditionally, by checking if "mptcp_pm_subflow_check_next" is present in kallsyms: this is not directly linked to the commit introducing this symbol but for the parent one which is linked anyway. So we can know in advance what will be the expected behaviour, and add the new endpoint only when it makes sense to do so. Fixes: 4878f9f8421f ("selftests: mptcp: join: validate fullmesh endp on 1st sf") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12netfilter: nft_socket: make cgroupsv2 matching work with namespacesFlorian Westphal1-3/+38
When running in container environmment, /sys/fs/cgroup/ might not be the real root node of the sk-attached cgroup. Example: In container: % stat /sys//fs/cgroup/ Device: 0,21 Inode: 2214 .. % stat /sys/fs/cgroup/foo Device: 0,21 Inode: 2264 .. The expectation would be for: nft add rule .. socket cgroupv2 level 1 "foo" counter to match traffic from a process that got added to "foo" via "echo $pid > /sys/fs/cgroup/foo/cgroup.procs". However, 'level 3' is needed to make this work. Seen from initial namespace, the complete hierarchy is: % stat /sys/fs/cgroup/system.slice/docker-.../foo Device: 0,21 Inode: 2264 .. i.e. hierarchy is 0 1 2 3 / -> system.slice -> docker-1... -> foo ... but the container doesn't know that its "/" is the "docker-1.." cgroup. Current code will retrieve the 'system.slice' cgroup node and store its kn->id in the destination register, so compare with 2264 ("foo" cgroup id) will not match. Fetch "/" cgroup from ->init() and add its level to the level we try to extract. cgroup root-level is 0 for the init-namespace or the level of the ancestor that is exposed as the cgroup root inside the container. In the above case, cgrp->level of "/" resolved in the container is 2 (docker-1...scope/) and request for 'level 1' will get adjusted to fetch the actual level (3). v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it. (kernel test robot) Cc: cgroups@vger.kernel.org Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2") Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-12netfilter: nft_socket: fix sk refcount leaksFlorian Westphal1-3/+4
We must put 'sk' reference before returning. Fixes: 039b1f4f24ec ("netfilter: nft_socket: fix erroneous socket assignment") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-11spi: nxp-fspi: fix the KASAN report out-of-bounds bugHan Xu1-2/+3
Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ================================================================== [ 37.254394] Disabling lock debugging due to kernel taint 0+1 records in 0+1 records out 3 bytes copied, 0.335911 s, 0.0 kB/s Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Cc: stable@kernel.org Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11minmax: reduce min/max macro expansion in atomisp driverLorenzo Stoakes1-7/+19
Avoid unnecessary nested min()/max() which results in egregious macro expansion. Use clamp_t() as this introduces the least possible expansion, and turn the {s,u}DIGIT_FITTING() macros into inline functions to avoid the nested expansion. This resolves an issue with slackware 15.0 32-bit compilation as reported by Richard Narron. Presumably the min/max fixups would be difficult to backport, this patch should be easier and fix's Richard's problem in 5.15. Reported-by: Richard Narron <richard@aaazen.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/ Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-11ASoC: meson: axg-card: fix 'use-after-free'Arseniy Krasnov1-1/+2
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li1-0/+11
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
2024-09-11ASoC: codecs: avoid possible garbage value in peb2466_reg_read()Su Hui1-1/+2
Clang static checker (scan-build) warning: sound/soc/codecs/peb2466.c:232:8: Assigned value is garbage or undefined [core.uninitialized.Assign] 232 | *val = tmp; | ^ ~~~ When peb2466_read_byte() fails, 'tmp' will have a garbage value. Add a judgemnet to avoid this problem. Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependencyArnd Bergmann1-1/+1
There is still a build failure when the rwrng support is in a loadable module but the mcu driver is built-in: arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng': turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register' Change the dependency to explicitly disallow the broken configuration. Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG") Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11soundwire: stream: Revert "soundwire: stream: fix programming slave ports ↵Krzysztof Kozlowski1-4/+4
for non-continous port maps" This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it breaks codecs using non-continuous masks in source and sink ports. The commit missed the point that port numbers are not used as indices for iterating over prop.sink_ports or prop.source_ports. Soundwire core and existing codecs expect that the array passed as prop.sink_ports and prop.source_ports is continuous. The port mask still might be non-continuous, but that's unrelated. Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-09-10riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFFCharlie Jenkins1-6/+6
The icache will be flushed in switch_to() if force_icache_flush is true, or in flush_icache_deferred() if icache_stale_mask is set. Between setting force_icache_flush to false and calculating the new icache_stale_mask, preemption needs to be disabled. There are two reasons for this: 1. If CPU migration happens between force_icache_flush = false, and the icache_stale_mask is set, an icache flush will not be emitted. 2. smp_processor_id() is used in set_icache_stale_mask() to mark the current CPU as not needing another flush since a flush will have happened either by userspace or by the kernel when performing the migration. smp_processor_id() is currently called twice with preemption enabled which causes a race condition. It allows icache_stale_mask to be populated with inconsistent CPU ids. Resolve these two issues by setting the icache_stale_mask before setting force_icache_flush to false, and using get_cpu()/put_cpu() to obtain the smp_processor_id(). Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: 6b9391b581fd ("riscv: Include riscv_set_icache_flush_ctx prctl") Link: https://lore.kernel.org/r/20240903-fix_fencei_optimization-v2-1-8025f20171fc@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-10drivers: perf: Fix smp_processor_id() use in preemptible codeAlexandre Ghiti1-1/+6
As reported in [1], the use of smp_processor_id() in pmu_sbi_device_probe() must be protected by disabling the preemption, so simple use get_cpu()/put_cpu() instead. Reported-by: Nam Cao <namcao@linutronix.de> Closes: https://lore.kernel.org/linux-riscv/20240820074925.ReMKUPP3@linutronix.de/ [1] Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Nam Cao <namcao@linutronix.de> Fixes: a8625217a054 ("drivers/perf: riscv: Implement SBI PMU snapshot function") Reported-by: Andrea Parri <parri.andrea@gmail.com> Tested-by: Andrea Parri <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20240826165210.124696-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-10MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVERKory Maincent1-0/+1
Add net/ethtool/pse-pd.c to PSE NETWORK DRIVER to receive emails concerning modifications to the ethtool part. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909114336.362174-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10dt-bindings: net: tja11xx: fix the broken bindingWei Fang1-16/+46
As Rob pointed in another mail thread [1], the binding of tja11xx PHY is completely broken, the schema cannot catch the error in the DTS. A compatiable string must be needed if we want to add a custom propety. So extract known PHY IDs from the tja11xx PHY drivers and convert them into supported compatible string list to fix the broken binding issue. Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property") Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1] Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10selftests: net: csum: Fix checksums for packets with non-zero paddingSean Anderson1-2/+14
Padding is not included in UDP and TCP checksums. Therefore, reduce the length of the checksummed data to include only the data in the IP payload. This fixes spurious reported checksum failures like rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe pkt: bad csum Technically it is possible for there to be trailing bytes after the UDP data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) + udp.len < ip.len). However, we don't generate such packets. Fixes: 91a7de85600d ("selftests/net: add csum offload test") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: phy: dp83822: Fix NULL pointer dereference on DP83825 devicesTomas Paukrt1-13/+22
The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10drm/amdgpu/atomfirmware: Silence UBSAN warningAlex Deucher1-2/+2
Per the comments, these are variable sized arrays. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v1David (Ming Qiang) Wu2-1/+86
Similar to jpeg_v2_dec_ring_parse_cs() but it has different register ranges and a few other registers access. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3d5adbdf1d01708777f2eda375227cbf7a98b9fe) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v2+David (Ming Qiang) Wu10-64/+78
This patch extends the same cs parser from JPEG v4.0.3 to other JPEG versions (v2 and above). Rename to more common name as jpeg_v2_dec_ring_parse_cs() from jpeg_v4_0_3_dec_ring_parse_cs(). Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 88dcad2d07c8d82e6a097c8e74239eb67333bcf7) Cc: stable@vger.kernel.org
2024-09-10drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3Kenneth Feng1-0/+3
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below: 0: 2.5GT/s, x4 250Mhz 1: 8.0GT/s, x4 616Mhz * 2: 8.0GT/s, x4 1143Mhz * the middle level can be removed since it is always skipped on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fedf6db3ea9dc5eda0b78cfbbb8f7a88b97e5b24)
2024-09-10drm/amd/pm: update the features set on smu v14.0.2/3Kenneth Feng2-1/+19
update the features set on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 25d48f2eb0af1f0e6f09f54a1a1716f48c0722c9)
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li1-1/+1
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 578aab4ecc73476393389440724b7a391cc0cea9)
2024-09-10drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi1-8/+12
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5) Cc: stable@vger.kernel.org
2024-09-10drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi1-8/+12
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) Cc: stable@vger.kernel.org
2024-09-10drm/amdkfd: Add cache line size infoDavid Belanger1-1/+7
Populate cache line size info in topology based on information from IP discovery table. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4e9fadacddca96a2e6fcee9cc9488b78eb7a6953)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 19:47:36 +0000