diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
13 files changed, 519 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/apple,soc-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,soc-cpufreq.yaml new file mode 100644 index 000000000000..f398c1bd5de5 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/apple,soc-cpufreq.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/apple,soc-cpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC cpufreq device + +maintainers: + - Hector Martin <marcan@marcan.st> + +description: | + Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of + the cluster management register block. This binding uses the standard + operating-points-v2 table to define the CPU performance states, with the + opp-level property specifying the hardware p-state index for that level. + +properties: + compatible: + items: + - enum: + - apple,t8103-soc-cpufreq + - apple,t6000-soc-cpufreq + - const: apple,soc-cpufreq + + reg: + minItems: 1 + maxItems: 6 + description: One register region per CPU cluster DVFS controller + + reg-names: + minItems: 1 + items: + - const: cluster0 + - const: cluster1 + - const: cluster2 + - const: cluster3 + - const: cluster4 + - const: cluster5 + + '#freq-domain-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#freq-domain-cells' + +additionalProperties: false + +examples: + - | + // This example shows a single CPU per domain and 2 domains, + // with two p-states per domain. + // Shipping hardware has 2-4 CPUs per domain and 2-6 domains. + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x0>; + operating-points-v2 = <&ecluster_opp>; + apple,freq-domain = <&cpufreq_hw 0>; + }; + + cpu@10100 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10100>; + operating-points-v2 = <&pcluster_opp>; + apple,freq-domain = <&cpufreq_hw 1>; + }; + }; + + ecluster_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <7500>; + }; + opp02 { + opp-hz = /bits/ 64 <972000000>; + opp-level = <2>; + clock-latency-ns = <22000>; + }; + }; + + pcluster_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <8000>; + }; + opp02 { + opp-hz = /bits/ 64 <828000000>; + opp-level = <2>; + clock-latency-ns = <19000>; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + cpufreq_hw: cpufreq@210e20000 { + compatible = "apple,t8103-soc-cpufreq", "apple,soc-cpufreq"; + reg = <0x2 0x10e20000 0 0x1000>, + <0x2 0x11e20000 0 0x1000>; + reg-names = "cluster0", "cluster1"; + #freq-domain-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml new file mode 100644 index 000000000000..34ede3b0de2c --- /dev/null +++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/apple,admac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Audio DMA Controller (ADMAC) + +description: | + The Audio DMA Controller (ADMAC) is used to load and store audio + samples from/to system memory. It is present on Apple SoCs + from the "Apple Silicon" family. + +maintainers: + - Martin PoviĊĦer <povik@protonmail.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + items: + - const: apple,t8103-admac + - const: apple,admac + + reg: + maxItems: 1 + + '#dma-cells': + const: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - '#dma-cells' + - dma-channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + dart_sio: iommu@235004000 { + compatible = "apple,t8103-dart", "apple,dart"; + reg = <0x2 0x35004000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + }; + + admac: dma-controller@238200000 { + compatible = "apple,t8103-admac", "apple,admac"; + reg = <0x2 0x38200000 0x0 0x34000>; + dma-channels = <12>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&dart_sio 2>; + };
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml index 82ad669feef7..06af2bacbe97 100644 --- a/Documentation/devicetree/bindings/iommu/apple,dart.yaml +++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml @@ -22,7 +22,9 @@ description: |+ properties: compatible: - const: apple,t8103-dart + enum: + - apple,t8103-dart + - apple,t6000-dart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/bluetooth-controller.yaml b/Documentation/devicetree/bindings/net/bluetooth-controller.yaml new file mode 100644 index 000000000000..f8fb29a36b06 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth-controller.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bluetooth Controller Generic Binding + +maintainers: + - John Doe <john@example.com> # TODO: bluetooth maintainers probably + +properties: + $nodename: + pattern: "^bluetooth(@.*)?$" + + local-bd-address: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 6 + maxItems: 6 + description: + Specifies the BD address that was uniquely assigned to the Bluetooth + device. Formatted with least significant byte first (little-endian), e.g. + in order to assigne the address 00:11:22:33:44:55 this property must have + the value [55 44 33 22 11 00]. + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt deleted file mode 100644 index 94797df751b8..000000000000 --- a/Documentation/devicetree/bindings/net/bluetooth.txt +++ /dev/null @@ -1,5 +0,0 @@ -The following properties are common to the Bluetooth controllers: - -- local-bd-address: array of 6 bytes, specifies the BD address that was - uniquely assigned to the Bluetooth device, formatted with least significant - byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/brcm,bcm43xx-bluetooth.yaml b/Documentation/devicetree/bindings/net/brcm,bcm43xx-bluetooth.yaml new file mode 100644 index 000000000000..a6b9ce80cd0b --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm43xx-bluetooth.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm43xx-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM43XX PCI Bluetooth Chips + +allOf: + - $ref: bluetooth-controller.yaml# + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: + This binding describes Broadcom BCM43XX PCI-attached bluetooth chips usually + found in Apple machines. The Wi-Fi part of the chip is described in + bindings/net/wireless/brcm,bcm4329-fmac.yaml. + +properties: + compatible: + enum: + - pci14e4,5fa0 # BCM4377 + - pci14e4,5f69 # BCM4378 + - pci14e4,5f71 # BCM4387 + + reg: + description: PCI device identifier. + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Board type of the Bluetooth chip. This is used to decouple + the overall system board from the Bluetooth module and used to construct + firmware and calibration data filenames. + On Apple platforms, this should be the Apple module-instance codename + prefixed by "apple,", e.g. "apple,atlantisb". + + brcm,taurus-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Bluetooth radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device. + This blob is used if the chip stepping of the Bluetooth module does not + support beamforming. + + brcm,taurus-bf-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Bluetooth radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device. + This blob is used if the chip stepping of the Bluetooth module supports + beamforming. + + local-bd-address: true + +required: + - compatible + - reg + - local-bd-address + +additionalProperties: false + +examples: + - | + pci0 { + #address-cells = <3>; + #size-cells = <2>; + + bluetooth@0,1 { + compatible = "pci14e4,5f69"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + brcm,board-type = "apple,honshu"; + /* To be filled by the bootloader */ + local-bd-address = [00 00 00 00 00 00]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml index f93c6e7a1b59..77eefa883d0a 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml @@ -79,8 +79,7 @@ properties: firmware-name: description: specify the name of nvm firmware to load - local-bd-address: - description: see Documentation/devicetree/bindings/net/bluetooth.txt + local-bd-address: true required: @@ -89,6 +88,7 @@ required: additionalProperties: false allOf: + - $ref: bluetooth-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index c11f23b20c4c..8b4147c64355 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM4329 family fullmac wireless SDIO devices +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices maintainers: - Arend van Spriel <arend@broadcom.com> @@ -42,10 +42,16 @@ properties: - cypress,cyw43012-fmac - const: brcm,bcm4329-fmac - const: brcm,bcm4329-fmac + - enum: + - pci14e4,43dc # BCM4355 + - pci14e4,4464 # BCM4364 + - pci14e4,4488 # BCM4377 + - pci14e4,4425 # BCM4378 + - pci14e4,4433 # BCM4387 reg: - description: SDIO function number for the device, for most cases - this will be 1. + description: SDIO function number for the device (for most cases + this will be 1) or PCI device identifier. interrupts: maxItems: 1 @@ -75,6 +81,31 @@ properties: items: pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$' + brcm,cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Wi-Fi radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device if present. + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Overrides the board type, which is normally the compatible of + the root node. This can be used to decouple the overall system board or + device name from the board type for WiFi purposes, which is used to + construct firmware and NVRAM configuration filenames, allowing for + multiple devices that share the same module or characteristics for the + WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms, + this should be the Apple module-instance codename prefixed by "apple,", + e.g. "apple,honshu". + + apple,antenna-sku: + $ref: /schemas/types.yaml#/definitions/string + description: Antenna SKU used to identify a specific antenna configuration + on Apple platforms. This is use to build firmware filenames, to allow + platforms with different antenna configs to have different firmware and/or + NVRAM. This would normally be filled in by the bootloader from platform + configuration data. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml index aa38680aaaca..156f1777fc96 100644 --- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml @@ -71,6 +71,27 @@ properties: power-domains: maxItems: 1 +patternProperties: + "^pci@": + $ref: /schemas/pci/pci-bus.yaml# + type: object + description: A single PCI root port + + properties: + reg: + maxItems: 1 + + pwren-gpios: + description: Optional GPIO to power on the device + maxItems: 1 + + required: + - reset-gpios + - interrupt-controller + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + required: - compatible - reg @@ -141,7 +162,7 @@ examples: pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; - pci@0,0 { + port00: pci@0,0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 152 0>; @@ -149,9 +170,17 @@ examples: #address-cells = <3>; #size-cells = <2>; ranges; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; }; - pci@1,0 { + port01: pci@1,0 { device_type = "pci"; reg = <0x800 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 153 0>; @@ -159,9 +188,17 @@ examples: #address-cells = <3>; #size-cells = <2>; ranges; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port01 0 0 0 0>, + <0 0 0 2 &port01 0 0 0 1>, + <0 0 0 3 &port01 0 0 0 2>, + <0 0 0 4 &port01 0 0 0 3>; }; - pci@2,0 { + port02: pci@2,0 { device_type = "pci"; reg = <0x1000 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 33 0>; @@ -169,6 +206,14 @@ examples: #address-cells = <3>; #size-cells = <2>; ranges; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; }; }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index d891ecfb2691..63523d1f3988 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -42,15 +42,13 @@ properties: bluetooth: type: object additionalProperties: false + allOf: + - $ref: /schemas/net/bluetooth-controller.yaml# properties: compatible: const: qcom,wcnss-bt - local-bd-address: - $ref: /schemas/types.yaml#/definitions/uint8-array - maxItems: 6 - description: - See Documentation/devicetree/bindings/net/bluetooth.txt + local-bd-address: true required: - compatible diff --git a/Documentation/devicetree/bindings/spi/apple,spi.yaml b/Documentation/devicetree/bindings/spi/apple,spi.yaml new file mode 100644 index 000000000000..bcbdc8943e92 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/apple,spi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/apple,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple ARM SoC SPI controller + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Hector Martin <marcan@marcan.st> + +properties: + compatible: + items: + - enum: + - apple,t8103-spi + - apple,t6000-spi + - const: apple,spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spi: spi@39b104000 { + compatible = "apple,t6000-spi", "apple,spi"; + reg = <0x3 0x9b104000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 0 1107 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5e32928c4fc3..e8e86e4e4596 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -108,6 +108,18 @@ properties: minItems: 2 maxItems: 4 + spi-cs-setup-delay-ns: + description: + Delay, in nanoseconds, after chip select is asserted. + + spi-cs-hold-delay-ns: + description: + Delay, in nanoseconds, before chip select is de-asserted. + + spi-cs-inactive-delay-ns: + description: + Delay, in nanoseconds, after chip select is de-asserted. + # The controller specific properties go here. allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/usb/apple,dwc3.yaml b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml new file mode 100644 index 000000000000..fb3b3489e6b2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/apple,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Silicon DWC3 USB controller + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: + On Apple Silicon SoCs such as the M1 each Type-C port has a corresponding + USB controller based on the Synopsys DesignWare USB3 controller. + + The common content of this binding is defined in snps,dwc3.yaml. + +allOf: + - $ref: snps,dwc3.yaml# + +select: + properties: + compatible: + contains: + const: apple,dwc3 + required: + - compatible + +properties: + compatible: + items: + - enum: + - apple,t8103-dwc3 + - apple,t6000-dwc3 + - const: apple,dwc3 + - const: snps,dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + usb@82280000 { + compatible = "apple,t8103-dwc3", "apple,dwc3", "snps,dwc3"; + reg = <0x82280000 0x10000>; + interrupts = <AIC_IRQ 777 IRQ_TYPE_LEVEL_HIGH>; + + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "host"; + }; |